Our Advisory Board Members

Our scientific Advisory Board is composed of external experts that provide a bird’s eye overview of the project at large. These leaders in their field will also provide key contacts to engage scientific, commercial and social stakeholders. The MIX-UP Advisory Board consists of three external members of considerable reputation in the scientific and dissemination activities related to the project.

Deutsche Bundesstiftung Umwelt

The Deutsche Bundesstiftung Umwelt (DBU) is one of Europe's largest foundations. It promotes innovative exemplary projects in the field of environmental protection.

Full profile

Contact

Deutsche Bundesstiftung Umwelt

An der Bornau 2
49090 Osnabrück
Germany

www.dbu.de

 

  • Dr Hans-Christian Schaefer

Netherlands Organisation for Applied Scientific Research

The Netherlands Organisation for Applied Scientific Research (TNO) is the largest fully independent research, development and consultancy organisation in the Netherlands with a staff of about 3,000 and a total annual turnover of more than 500 million Euros. It derives a significant portion of its contract R&D from foreign private sector, governments and international organisations. TNO’s primary tasks are to support and assist trade and industry including SME’s, governments and others in technological innovation and in solving problems by rendering services and transferring knowledge and expertise.

Full profile

Contact

TNO

Princetonlaan 6
3584 CB Utrecht
Netherlands

www.tno.nl/plastics

  • Dr Esther Zondervan-van den Beuken

Wageningen University

Wageningen University (WU) is part of Wageningen University & Research (Wageningen UR). Wageningen UR, a collaboration between Wageningen University and 9 specialised research institutes, is a leading international education and research organization that contributes importantly to the quality of life in the fields of food and food production, sustainable agrosystems, living environment and health, lifestyle and livelihood.

Full profile

Contact

Wageningen University

Droevendaalsesteeg 4
6708 PB Wageningen
Netherlands

www.wur.nl/en

 

  • Prof. Hauke Smidt

Our Friends

Our friends belong to the international scientific community of researchers in the field of plastic recycling and synthetic biology. They provide relevant input to our project with their own research findings by organising Joint Meetings and Guest Lectures.

If you want to become a member of our network as well, contact us.

 

 

 

BioICEP

Europe’s waste management policy has evolved over the last 30 years – shifting away from discarding waste as an unwanted burden to seeing it as a valued resource. Today, plastic waste is considered a priority waste stream. The EU-funded BioICEP project aims to reduce the burden of plastic waste. Forming a European-Chinese collaboration, the project will develop a solution for mixed plastic pollution environments. Specifically, researchers will work on three innovative booster technologies aimed at increasing plastics degradation to record levels. BioICEP will take a triple-action depolymerisation systems approach to break down plastic waste: mechano-biochemical disintegration processes, biocatalytic digestion and microbial consortia. The outputs will be used as building blocks for new polymers or other bioproducts.

Full profile

Contact

Athlone Institute of Technology
Materials Research Institute

Dublin Road, Athlone, Co. Westmeath
Ireland

www.bioicep.eu

  • Dr Margaret Brennan Fournet

SinFonia

SinFonia (Synthetic Biology-guided engineering of Pseudomonas putida for biofluorination) aims at producing novel fluorochemicals in a biological way. Materials containing the chemical element fluorine (F) are extremely important in our modern world, with applications in electronics, healthcare, automotive parts and wearables. Currently, these fluorochemicals are exclusively synthesized using chemical methods, something SinFonia wants to change by bringing a novel chemistry for fluorine in biological systems.

Full profile

Contact

The Novo Nordisk Foundation
Center for Biosustainability
Technical University of Denmark

Kemitorvet, Building 220, Room 204F
2800 Kgs Lyngby
Denmark

www.sinfoniabiotec.eu

 

 

  • Dr Pablo Iván Nikel

SynBio4Flav

By using synthetic biology, SynBio4Flav aims to provide a cost-effective alternative to current flavonoid production. SynBio4Flav’s scientific challenge is to produce flavonoids by breaking down their complex biosynthetic pathways into standardized specific parts, which can be transferred to engineered microorganisms within Synthetic Microbial Consortia to promote flavonoid assembly through distributed catalysis. SynBio4Flav’s groundbreaking approach has great potential beyond the production of flavonoids. The project’s ultimate goal is to deliver a paradigm shift in biotechnological manufacturing of complex natural chemicals.

Full profile

Contact

National Centre for Biotechnology
Spanish National Research Council

Calle Darwin 3
28049 Madrid
Spain

https://synbio4flav.eu

 

  • Dr Juan Nogales

Glaukos

Glaukos* will develop biobased textile fibres and textile coatings that are adapted to the needs of the 21st century.

The complete life cycle of clothing and fishing gear will be redesigned, their sustainability performance will be enhanced significantly, while their technical performance will be matched to end-user requirements.

The ambition is to significantly reduce the carbon and plastic footprint of clothing and fishing gear.

(*Glaukos is the Greek sea god of fishermen. He was commonly believed to protect the oceans, as is the ambition of this project by developing innovative alternatives for textiles that are currently polluting our oceans.)

Full profile

Contact

Bio Base Europe Pilot Plant VZW

Rodenhuizekaai 1
9042 Desteldonk Gent
Belgium

www.glaukos-project.eu

 

  • Dr Zsófia Kádár

MIPLACE

MIPLACE (Microbial Integration of Plastics in the Circular Economy) is a multidisciplinary project that aims to transformdifficult-to-degrade plastics into molecules of industrial interest. For this purpose, MIPLACE will engineer microbial communities to make them degrade plastic waste (PET and PU) and use it as feedstock to transform it into high value-added molecules. These resulting substances will be used to produce an easily degradable material of commercial interest: bio-PU.

MIPLACE has a strong focus on sustainability, as it will deliver a novel biotechnological approach to manage the recycling of a material that would have ended up as waste otherwise.

Full profile

Contact

Imperial College London

South Kensington Campus
London SW7 2AZ
United Kingdom

https://miplacebio.com

 

 

  • Dr Jose Jimenez

ENZYCLE

Plastic waste is a major and increasing problem for the EU. In 2017, more than 27 million tonnes of plastic waste were produced in the EU28 (plus Norway and Switzerland) – the equivalent of more than 50 kg per citizen. However, less than one-third of this is recycled; the rest is either incinerated or sent to landfill.

Clearly, with the EU’s ambitions for a circular economy, and its stated strategy of achieving 100 % of packaging – including plastics – as recyclable or reusable by 2030, this is unsustainable. It is therefore essential to find ways to recycle the fraction that is currently not recycled, particularly those plastics used for packaging – such as those based on PET (polyethylene terephthalate) and multilayer packaging based on combinations of polyester and poliolefin layers – that make up some 63 % of the total plastic waste generated in Europe.Current mechanical recycling approaches are not ideal; many PET-based materials are plastic mixes or multi-layered, and often specificity is required due to the complex mixtures generated from waste management plants. The application of enzymes, due to their high substrate specificity, can allow this problem to be solved.

The ENZYCLE project will therefore adopt a process based on enzymes. The project will develop new enzymes and advanced processes for treating the non-recycled plastic fraction. This approach will valorise a wide variety of plastic waste, such us PET trays and clamshell, multilayer packaging (mainly PET/PE and PET/PP) and microplastics present in wastewater, producing new materials from the waste, including virgin PET, polyurethane foam and polyols.

Full profile

Contact

ITENE

Parque Tecnológico
C/ Albert Einstein, 1
46980 Paterna · Valencia

www.itene.com
www.enzycle.eu

 

  • Licinio Diaz Expósito
  • Marta de la Cruz

iMULCH

As plastics production continues to increase globally, topics such as “microplastics” and “plastics in the environment” are the focus of discussions and are becoming more relevant. While the occurrence, distribution and effects of plastics in limnic and marine waters have already been investigated, the data situation regarding plastic emissions in soils is still relatively limited. Up to now, neither the exact routes, quantities and concentrations of polymers in soils nor the effects of plastics on organisms and the soil ecosystem are known.
In the iMulch project, methods are being developed and validated that enable the detection of plastics (micro- and macroplastics) in soils and drainage waters. The analysis primarily focuses on the effect of drainage water on municipal wastewater treatment processes. As an example, plastic emissions from so-called mulch films from agriculture will be analysed. That way, the iMulch project contributes to the assessment of the consequences of plastic inputs not only in water but also for the soil ecosystem. The investigation of terrestrial systems supplements the research on aquatic systems and thus provides the possibility of a holistic view on plastic emissions.

Full profile

Contact

Institut für Energie- und Umwelttechnik

Bliersheimer Str. 58-60
47229 Duisburg
Germany

www.IUTA.de
www.imulch.eu

  • Dr Carmen Wolf